NX Pro+ Tester
 
The Dynalab NX Pro+ Tester is modular and is designed for applications requiring up to 32,768 test points. It has the same "front end" as the NX Pro Tester, but employs a series of Expansion Units to accommodate the test point cards. Each expansion unit is supplied with a 2' and a 6' ribbon cable to connect to the NX Pro Tester - either cable can be used depending on your set up needs; and 1 NX Terminator. Each Expansion Unit can contain up to 8 test point cards for 1024 test points. A maximum of 32 Expansion Units may be connected for 32,768 test points.

The flexibility of the NX System allows each program to perform multiple tests, display custom messages or sounds, and analyze the results of a test or an input to "decide" which operation to perform next. The NX Pro+ Tester has 1.3Mb memory capacity for program storage and is compatible with Printers, Scanners, and all other Dynalab NX System accessories.

Low Voltage Tester Specifications

· 80 character, 4 line vacuum fluorescent display

· Simple 4-button user interface

· Testing for continuity, shorts, diodes, resistors, capacitors

· High speed shorts testing

· Precision resistance measurements

· Continuous high speed scanning for real time complete status harness.

· Keyed security access and control

· Built for rough industrial environments

· 2 serial ports for connection to printers and scanners

· Standalone operation

· Uses a high capacity memory card

· Expandable architecture - tests up to 32,768 test points